Electrical Testing

Testing for explosion protected equipment and equipment for use in potentially explosive atmosphere and hazardous (classified) locations, ATEX and IECEx, as per IEC, EN, CSA, UL, etc standards.

ELCA now offers services for Electrical Testing for various types of electrical items like cables, electrical accessories, enclosures, insulation materials, cable glands, etc.

Testing for Explosion Protected Equipment and Equipment for use in potentially explosive atmospheres and hazardous (Classified) locations – ATEX and IECEx as per IEC, EN , BIS, etc. know more..

We offer tests for various electrical parameters like:

  • Measurement of Capacitance
  • Surface Resistance Test
  • Resistivity Tests
  • Conductivity Tests
  • High Voltage Breakdown Tests
  • Di-electric Strength Tests
  • Cross Sectional Area of Conductors
  • Insulation Resistance Tests
  • Ingres Protection Tests

Tests on Cables

  • Physical Tests on Insulation and Sheath
    • Tensile Tests
    • Elongation at Break
    • Ageing Tests
    • Hot Set Test
    • Shrinkage
    • Water Absorption
    • Volume Resistivity
    • Loss of Mass Test
    • Hot Deformation Tests
    • Heat Shock Tests
  • Insulation Resistance Test
  • High Voltage Test
  • Flammability Test

Tests on Cable Glands as per IEC 62444 / BS 6121 / EN 50262 :

  • Cable Retention Test
  • Cable Anchorage Pull Test
  • Cable Anchorage Twist Test
  • Impact Test
  • Torque Test
  • Ingress Protection Test
  • Electrical Continuity Test
  • Insulation Resistance Test

Tests on Cable Glands as per IEC 60079 (ATEX and IECEX)

  • Cable Pull Tests
  • Ingress Protection Tests
  • Thermal Endurance Tests
  • Torque Tests
  • Sealing Tests
  • Pressure Tests
  • Impact Tests
  • Mechanical Tests

Environmental / Climatic Tests :

Dry Heat Tests, Humidity Tests, Cold Chamber tests, Thermal Cyclic Tests, etc.